Good Performance High Pressure Gear Centrifugal Transfer Pumps Used
NCB Series Inside Engaged Gear Pump is a volumetric pump for
transporting liquid, which has advanced structure and good
performance. This pump employs the inside engagement for gears, the
pitch circles of both inside and outside gear are at one side,
another side is separated by “swing link” on the pump cover and
forms up feeding and discharging chamber. The driving inside gear
on the main shaft drives the pinions to rotate in same direction,
in the feeding chamber, the gear teeth are separated each other,
this forms up negative pressure surface, so it sucks in liquid.
Gear teeth enter into the engagement surface continuously in the
discharging chamber and extrude liquid out.
NCB Series Inside Engaged Gear Pump is applied to convey liquid
from all kinds of light or volatility to deep sticky, even to
half-solid. It is widely used in petroleum, chemistry, oil, paint
Product competitive advantage:
The inner gearing principle is adopted for this pump. The annular
and external gear pitch circles closely lean against one side, the
other side is separated by covering with “ crescent plate” . The
annular gear driver the external gear for the same direction
rotation. It has the advanced structure, fine quality, small
volume, large flow, low noise, durable service life.
Introduction of Company:
Juneng Group has set-up a 1st class in-house laboratory for
chemical composition analysis, metallographic analysis, spectrum
analysis, performance analysis, radiographic inspection, magnetism
inspection, ultra-sonic inspection and etc. This is to imply with
the latest advance instrumentations and rigorous working attitude
to ensure every part of product is stable and reliable.