Wholesale Marketplace
Home >

SSID / DOM Cold Drawn Welded Tube Steel For Pneumatic Cylinders

Categories Honed Tube
Place of Origin: China
Brand Name: HY
MOQ: 5 tons
Price: Negotiation
Packaging Details: Anti rust oil to be applied on material and each rod to be packed in paper sleeve
Delivery Time: 30days
Payment Terms: L/C, T/T
Supply Ability: 30tons a day
Certification: ISO9001:2008
Material: Steel
Name: Hydraulic cylinder tube
Specifications: GB/T, DIN2391, EN10305-1
Delivery condition: BKS / BK
Inside honed dia: H8
Length: 5m - 5.8m
  • Product Details
  • Company Profile

SSID / DOM Cold Drawn Welded Tube Steel For Pneumatic Cylinders

SSID / DOM Cold Drawn Welded Tube Steel For Pneumatic Cylinders


SSID/DOM TUBE

Detailed Product Description

With the aid of a special drawing technique, the cold drawn welded tube with a inside smooth and

compressed surface can directly used for the hydraulic and pneumatic cylinder application ( ready-to-use). The hoing or burnishing is not required. Compared to the seamless tube, the advantage of

the SSID reduce the wall thickness deviation and the material cost.



Specification:

EN10305-2 , DIN 2393, ASTM A513 Type 6
ID tolerance: H9
ID roughness: Ra ≤ 0.80u
Concentricity < 3%
Delivery status: BK or BKS
Honing or Burnishing process can be provided after SR on SSID tubes with H8 tolerance.
The welded tubes were approved by eddy current testing and ultrasonic testing.
Hydraulic cylinders were also approved by eddy current test.
Finished tubes are also tested by UT and ET,
Ultrasonic Test (EN10246-7),Eddy current test(EN 10246-3)

Chemical Composition

Steel Grade20#45#25Mn27SiMnQ345B(ST52)*Q345D(ST52)
C0.17-0.230.42-0.500.22-0.290.24-0.320.200.18
Si0.17-0.370.17-0.370.17-0.371.10-1.400.550.55
Mn0.35-0.650.50-0.800.70-1.001.10-1.401.00-1.601.00-1.60
P0.0350.0250.030.0350.040.03
S0.0350.020.030.0350.040.03
Cu0.250.200.200.30//
Ni0.300.250.250.30//
Cr0.250.250.250.30//
V////0.02-0.150.02-0.15
Nb////0.015-0.060.015-0.06
Ti////0.02-0.200.02-0.20
Al/////0.015

Mechanical property

Supply ConditionCold finished(Hard) - BKCold Drawn & Stress - relieved (BK+S)

Hardness

HB

Steel Grade

Tensile Strength

Mpa

Elongation(%)


Tensile Strength

Mpa

Yield Strength

Mpa

Elongation(%)
20#≧620≧8≧570≧470≧14175
45#≧650≧5≧600≧520≧12207
ST52≧640≧5≧600≧520≧15190
25Mn≧640≧5≧600≧510≧15195
27SiMn≧840≧5≧800≧720≧10230

Hydraulic Cylinder Tube

1. Specification
GB/T, DIN2391, EN10305-1

2. Delivery Condition
Stress Relieving Annealed a ( +SR, BKS)
As per the request, + N (NBK) or + C ( BK) is available.

3. Outer Diameter
< 40 mm +/-0.2mm
From 40 to 100 mm +/-0.3mm
>100mm +/-0.5mm

4. Wall Thickness
<100mm OD +/-5%
>100mm +/-7.5%

5. Straightness 0.5/1000mm

6. Inside Honed Dia ISO H8

7. Rourghness Ra 0.2~0.4um

8. Length 5.0-5.8m

9. Fix length tolerance
Length<500 +3mm
500< length <=2000 +5mm
2000<length <5000 +10mm
5000<length<7000 +20mm

10. Stencilling Mark
Mill Logo + Specification + Delivery Condition + Steel Grade + Size + Heat Number

11. Tube Ends
Tube ends shall cut square to the tube axis and be free from excessive burrs.
Both ends protected with Plastic caps.

As the result of stress relieved annealing after the final drawing, residual stresses are reduced, forming within defined limits is made possible, and dimensional changes during/after machining are minimized.


Product Tags:

honed tubing

  

honed cylinder tube

  
Quality SSID / DOM Cold Drawn Welded Tube Steel For Pneumatic Cylinders wholesale
Send your message to this supplier
 
From:
Enter your email please.
To: Jiangsu New Heyi Machinery Co., Ltd
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0